5.3 Normal Operation
Normal operation of the CaviBlaster
system is defined as user control of water
flow via the gun trigger. Control of the power unit from the gun trigger is
accomplished by a mechanical shut-off valve in the gun. Should a problem
develop with the control valve, discontinue using the CaviBlaster until fixed.
Review the safety requirements for PPE and safe
operation before proceeding.
1) Startup the power unit as described in Section 5.2.
2) Activate the cleaning cavitation stream by squeezing the trigger to the
open or “ON” position (See Figure 5.3). Release trigger to stop the water
flow and direct to bypass.
3) If the diver operating the unit must be replaced or the cleaning operation
must be interrupted or terminated, turn the unit off
and then release the
water pressure in the hose(s) by squeezing the gun trigger to the open or
“ON” position (See Figure 5.3)
while under water
.
Revert back to step 5.2
of the operating instructions when the diver or replacement is ready to
continue cleaning.
Although the CaviBlaster system is safe to use when submerged in water,
the system generates a high-pressure (up to 3,080 psi (210 bar)) water
stream, which can cause injury when the gun is out of the water.
ALWAYS
keep the gun submerged when the pressure pump is running.
Page 21/35
For more information please email [email protected] or call 1-(352)275-5319
DO NOT START THE MOTOR UNTIL THE DIVER IS
READY FOR UNDERWATER OPERATION.
