7.0 WINTERIZATION
The power unit should be winterized if stored at temperatures below 32 degrees
Fahrenheit (0 degrees Celsius).
Total system displacement with 100 ft of hose (optional):
4.3 gallons.
Total system displacement without hose:
2.0 gallons.
To winterize the CaviBlaster 2828-E60 power unit:
1. Fill a 5 gallon (19 liter) or larger container with appropriate antifreeze
solution.
2. Connect a 1-1/2” cam-lock socket with a minimum amount of 1-1/2” clear
hose to the water inlet connection on the control panel (See Figure 2.2) and
place the open end of the clear hose into the antifreeze solution.
3. Attach a minimal amount of pressure hose to the pressure connection on the
control panel (See Figure 2.2) and direct the open outlet of the hose into the
antifreeze tank.
4. Attach a minimum amount of hose to the start-up by-pass valve and place
the open end into the antifreeze tank.
5. Open the start-up by-pass valve and start the unit and make sure the pump
is primed.
6. Close the start-up by-pass valve and run the unit until antifreeze comes out
of the open end of the pressure hose for 10 seconds.
7. Stop the unit and disconnect all hoses.
Following this procedure will ensure that all the critical system components exposed to
water have been flushed with antifreeze.
(EOS)
Page 32/35
For more information please email [email protected] or call 1-(352)275-5319
