Castolin Eutectic CastoTIG, Operating Manual / Spare Parts List

Page: 41 / 79

25
-Select 4- step mode (3)
Important! The set-up parameter SFS must be set to “OFF” (see: “The Set-up menu:
Level 2”). The factory setting (i.e. in which the power source is delivered) is: Parameter
SFS = “OFF”.
-Welding start- up with starting current I
S
: Push forward and hold the torch trigger
-Welding with main current I
1
: Release the torch trigger
-Lowering to final current I
E
: Push forward and hold the torch trigger
-End of welding: Release the torch trigger
I
Fig.8 4-step mode
t
I
1
GPr
I
S
t
1
t
2
I
E
G-L
G-H
4-step