48
-Press the “Mode” button (1) to select the “Rod-
electrode (MMA) welding” mode (5)
-While pressing and holding the Set button (13), press the “Mode” button (1)
-The first set-
up parameter is displayed (e.g. “HCU”)
Important!
The first parameter to be displayed is always the one that was the last to be
selected the last time the set-up menu was accessed.
-Select the set-
up parameter “2nd” with the parameter selection buttons (8) and (9).
Select “Parame-
ter 2nd”
Once the set-up parameter “2nd” has been selected:
-While pressing and holding the Set button (13), press the “Mode” button (1)
-The first set-
up parameter of Level 2 is displayed (e.g. “ASt”)
Important!
The first parameter to be displayed is always the one that was the last to be
selected the last time the set-up menu was accessed.
Accessing
Selecting and
altering the set-
up parameter
-Select the desired set-
up parameter with the parameter selection buttons (8) and
(9).
-Alter the value of the set-
up parameter with the adjusting dial (7)
-Press the Set button (13) twice
Exiting and
saving
(1)
(5)
Level 2: Rod-electrode set-up parameters
ASt
.....
A
nti-
St
ick
... On / OFF ... factory setting: On
See the section headed: “Rod electrode (MMA) welding”
ELn
....
E
lectrode-
l
i
n
e
... characteristic-selection function ... con / 0.1 - 20 / P
Factory setting: con
See the section headed: “Rod electrode (MMA) welding”
Available set-up
parameters
Summary of Contents for CastoTIG
