CASO DESIGN 1520, Original Operating Manual

Page: 37 / 114

37
Warning
The sealing bar gets very hot.
Please observe the following safety notice in order not to burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly after sealing process.
Please note
► Do not remove the teflon tape!
15.2 Control panel
Vacuum & Seal (Vakuum & Schweißen)
For automatic vacuuming and sealing of bags or containers
Press the button again to cancel the operation.
Seal (Schweißen)
For sealing of a bag without additional vacuum operatioin.
Press the button again to cancel the operation.
Pulse Vacuum (Manuelles Vakuum)
As long as you press the button air is with drawn from the bag. If you release the button
this operation will stop. Afterwards seal the bag with
Seal (Schweißen) button. Also
usuable for canisters.
15.3 Rating plate
The rating plate with the connection and performance data can be founded on the back of
the device.
16 Operation and Handing
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
16.1 Operating Instructions
After each sealing session and before starting up, check to make sure the unit and all
accessories that come in contact with the foodstuff are thoroughly clean. Follow the
cleaning instructions in
chapter “cleaning and maintenance”.
16.2 Bags and rolls
Please only use specified bags and rolls designed for vacuum sealing. Do not use other
materials such as plastic wrap. All vacuum rolls and bags delivered by CASO are
appropriate for cooking under vacuum (sous vide).