CASO DESIGN 1520, Original Operating Manual

Page: 41 / 114

41
17.1 Safety information
Attention
Please observe the following safety notices, before you commence with cleaning the
device:
► Unplug the device before cleaning.
► To ensure optimum performance, the unit must be cleaned regularly. Failure to clean
the unit regularly can lead to potential malfunctions, as well as safety and health risks.
► The sealing bar remains hot after use. Wait a few minutes until the bar has cooled
before cleaning.
► Clean the unit after every use as soon as it has cooled. Leaving the unit uncleaned for
long periods can make it very difficult to remove leftover food and grime and may even
damage the unit.
► If moisture penetrates the unit’s housing, it can damage the electronic components.
Please ensure that no moisture enters the device.
► Do not use any harsh or abrasive cleaning agents.
► Do not attempt to scrape off stubborn grime with hard or abrasive tools.
► Dry all parts thoroughly before using after cleaning.
► Never immerse the device in water or other liquids and do not place in the dishwasher.
17.2 Cleaning
◆
Outside of the unit
Wipe the outside of the unit with a damp cloth or sponge and mild dish soap.
◆
Inside of the device
To clean the inside of the unit wipe away any food or liquids with a paper towel.
◆
Preservation bags
Washing the bagging material in warm water with a mild dishwashing soap, then rinse the
bags well and allow drying thoroughly before reusing
.
Attention
► Bags used to store raw meats, fish or greasy foods can’t be reused.
◆
Sealing profile (which presses the bag against the sealing bar)
Remove the sealing profile and clean it in warm soapy water.
Please note
► The sealing profile should be cleaned thoroughly before installing it again.
► Be careful during re-installation, so that nothing will be damaged and sealing profile is
placed well so that the device can work properly.