Configuring Channel Settings
In many cases you can run a monitoring session without modifying the default channel settings,
which are shown in Table 10:
Table 10:
Default Channel Settings
Channel
Body Location
High Limit
Low Limit
Channel 1
Left Forehead
90
50
Channel 2
Right Forehead
90
50
Channel 3
<Unassigned>
90
50
Channel 4
<Unassigned>
90
50
If you should need to modify these settings, you can display the Patient Setup options by either of
the following methods:
•
From the Channel Status area, touch the StO
2
reading, body location icon (e.g.,
or
),
or High/Low limit indicator (e.g., ).
•
From the Main Menu, touch
Patient
and then touch
Setup
.
Figure 27 describes the Patient Setup options.
Figure 27:
Patient Setup Screen
Touching a channel’s body location icon or High/Low limit allows you to configure it.
Channel #
Channel 1 Body Location
(left cortex)
Channel 2 Body Location
(right cortex)
Channels 3 & 4 Body
Location (unused)
Save changes
and close screen
Channel 1 High Limit
Channel 1 Low Limit
Cancel and close screen
without saving changes
PN 21-22-3000 Rev 07
43
FORE-SIGHT ELITE User Manual
