For 4-channel monitoring (Channels
➀
-
➃
, or some combination of [
➀
or
➁
] + [
➂
or
➃
]), touch
the upper or lower half of the trace area to toggle that section between separate and overlay
views; each pair can be toggled independently (Figure 24).
Figure 24:
4-Channel Display Modes
Capturing the Oximeter Display
The Oximeter’s snapshot function allows you to save screen captures to a USB flash drive during
patient monitoring.
To save a snapshot of the Oximeter display:
1.
Insert a CASMED-approved USB flash drive into one of the two USB ports; you may use
either the front or rear USB port, though only one may be active at a time.
2.
Verify that the USB icon (
) appears in the lower-right corner of the display (to the left
of the
/
button).
3.
Touch the camera icon
(which appears next to the USB icon) to save a snapshot.
The capture takes approximately 5-10 seconds, during which the camera icon is
highlighted (
) and the display is frozen. The camera icon returns to normal after a
bitmap (.bmp) image of the display is saved to the USB drive.
PN 21-22-3000 Rev 07
33
FORE-SIGHT ELITE User Manual
