Note:
The Oximeter has one male 9-pin (DTE) DB9 and one female 9-pin (DCE)
DB9 Serial Communications Port. Some older units may be shipped with a null
modem adapter attached to port A to create a female (DCE) serial port. If the
DCE serial port is not required, the null modem adapter may be removed.
To remove the null modem adapter, unscrew the jackscrews projecting from
the DCE adapter. Be careful not to unscrew the jackscrews associated with the
male DTE port. The adapter may be reinstalled on a male port by reversing this
procedure.
Configuring Serial Ports
Serial ports A and B may be configured independently, as follows:
1.
From the Main Menu, touch
Setup
.
2.
Touch
Log In
to display the Password keyboard.
3.
Enter the password (2466) and touch
✔
to access the Biomed submenu.
4.
Touch
Ports
to display the Ports options.
5.
To set the port protocol:
a.
Touch the Protocol button immediately to the right of
A
or
B
(it displays
None
by
default) to display the protocol selections.
b.
Touch a Protocol (or
None
) to select it or touch
✘
to cancel.
PN 21-22-3000 Rev 07
17
FORE-SIGHT ELITE User Manual
