•
Drum
This setting optimizes for drum sounds. The damper pedal does not function. The Hold1, Channel
Coarse Tune, and Master Coarse Tune messages are ignored if they are received.
•
Drawbar(XW-P1 only)
This setting optimizes for drawbar tones. The damper pedal performs on/off operations.
•
Hex Layer(XW-P1 only)
This setting optimizes for hex layer tones. The damper pedal performs on/off operations.
•
Solo Synth
This setting optimizes for solo synth tones. The damper pedal performs on/off operations.
•
User Wave(XW-G1 only)
This setting optimizes for user wave tones. The damper pedal performs on/off operations.
Performance Number/Step Sequencer Number Switching by Bank Select Message and
Program Change Message
The bank select message and program change message can be used to
switch the performance number and/or sequencer number.
The change target can be switched by the bank select MSB. The change target is specified by the
program change number. The bank select LSB is ignored.
The following shows the relationship between the bank select MSB and the change target.
Change Target
Bank Select MSB
Preset Performance
70H
User Performance
71H
Preset Step Sequencer
72H
User Step Sequencer
73H
When Perform NRPN and S.Seq NRPN are enabled by Instrument settings, number switching by
bank select and program change is ignored. For details about performance and the Step Sequencer, see
the User’s Guide.
9
Channel After Touch
Message Format:
DnH vvH
n:
MIDI Channel Number
vv:
Value
Receive
Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
10
Pitch Bend
Message Format:
EnH llH mmH
n:
MIDI Channel Number
ll:
Value LSB
mm:
Value MSB
37
