Casio XW-G1 Manual Download Page 16

Page: 16 / 111

7.11

Sostenuto (42H)

Message Format:

BnH 42H vvH

MIDI Channel Number

vv:

Value (Note1)

Note1

For information about the relationship between setting values and send/receive values, see the “39.1 Oﬀ/On Setting

Value Table” in “VIII Setting Values and Send/Receive Values” of this document.

Send

Sent when a pedal that has a sostenuto function is operated.

Receive

Receipt performs an operation equivalent to a sostenuto pedal operation.

7.12

Soft (43H)

Message Format:

BnH 43H vvH

MIDI Channel Number

vv:

Value (Note1)

Note1

For information about the relationship between setting values and send/receive values, see the “39.1 Oﬀ/On Setting

Value Table” in “VIII Setting Values and Send/Receive Values” of this document.

Send

Sent when a pedal that has a soft function is operated.

Receive

Receipt performs an operation equivalent to a soft pedal operation.

7.13

Drawbar Position 16’(46H)(Drawbar tone selected)

Note

This message is valid only when a drawbar tone is selected for the MIDI channel.

Message Format:

BnH 46H vvH

MIDI Channel Number

vv:

Value (Note1)

Note1

For information about the relationship between setting values and send/receive values, see the “39.5 Drawbar

Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.

Send

Sent when a drawbar 16’ is operated.

Receive

Receipt changes the drawbar 16’ position.

7.14

Filter Resonance(47H)

Message Format:

BnH 47H vvH

MIDI Channel Number

vv:

Value

Receive

Receipt changes the resonance intensity.

Summary of Contents for XW-G1
















































































































Search results

Summary of Contents for XW-G1

Reviews:

Related manuals for XW-G1

Brands by name

Popular brands

Casio XW-G1, Manual

Search results

Summary of Contents for XW-G1

Reviews:

Related manuals for XW-G1

Brands by name

Popular brands