Receive
Receipt causes a change in the tone bank number stored in Instrument memory, but the
tone is not actually changed until a Program Change message is received. For details, see “8 Program
Change”.
The performance number and Step Sequencer number can also be changed by the bank program.
For details, see “8 Performance Number/Step Sequencer Number Switching by Bank Select Message
and Program Change Message”. For details about performance and the Step Sequencer, see the User’s
Guide.
7.2
Modulation (01H)
Message Format:
BnH 01H vvH
n:
MIDI Channel Number
vv:
Value
Send
Sent when the modulation wheel is operated.
Receive
Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
7.3
Portamento (05H)(Solo Synthesizer tone selected)
Note
:
This message is valid only when a Solo Synthesizer tone is selected for the MIDI channel.
Message Format:
BnH 05H vvH
n:
MIDI Channel Number
vv:
Value
Receive
Receipt changes the portamento application time.
7.4
Data Entry (06H,26H)
Message Format:
BnH 06H mmH (MSB)
BnH 26H llH (LSB)
n:
MIDI Channel Number
mm:
MSB Value
ll:
LSB Value
Send
Sent when there is a change to the parameter assigned to RPN, NRPN.
Receive
Receipt changes the parameter assigned to RPN, NRPN.
7.5
Volume (07H)
Message Format:
BnH 07H vvH
n:
MIDI Channel Number
vv:
Value
13
