Casio XW-G1 Manual Download Page 18

Page: 18 / 111

Note1

For information about the relationship between setting values and send/receive values, see the “39.2 –64 - 0 - +63

Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.

Receive

Receipt makes a relative change in the time it takes for a note to rise to its maximum level.

7.19

Drawbar Position 4’(49H)(Drawbar tone selected)

Note

This message is valid only when a drawbar tone is selected for the MIDI channel.

Message Format:

BnH 49H vvH

MIDI Channel Number

vv:

Value (Note1)

Note1

For information about the relationship between setting values and send/receive values, see the “39.5 Drawbar

Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.

Send

Sent when a drawbar 4’ is operated.

Receive

Receipt changes the drawbar 4’ position.

7.20

Filter Cut Oﬀ (4AH)

Message Format:

BnH 4AH vvH

MIDI Channel Number

vv:

Value (Note1)

Note1

For information about the relationship between setting values and send/receive values, see the “39.2 –64 - 0 - +63

Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.

Receive

Receipt changes how the cut-oﬀ ﬁlter is applied.

7.21

Drawbar Position 2 2/3’(4AH)(Drawbar tone selected)

Note

This message is valid only when a drawbar tone is selected for the MIDI channel.

Message Format:

BnH 4AH vvH

MIDI Channel Number

vv:

Value (Note1)

Note1

For information about the relationship between setting values and send/receive values, see the “39.5 Drawbar

Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.

Send

Sent when a drawbar 2 2/3’ is operated.

Receive

Receipt changes the drawbar 2 2/3’ position.

Summary of Contents for XW-G1
















































































































Search results

Summary of Contents for XW-G1

Reviews:

Related manuals for XW-G1

Brands by name

Popular brands

Casio XW-G1, Manual

Search results

Summary of Contents for XW-G1

Reviews:

Related manuals for XW-G1

Brands by name

Popular brands