Received values and parameter setting values
The range of the value of each DSP Parameter 7
array element depends on the selected DSP or array number. Unlike manipulation of a DSP parameter
using a System Exclusive Message, a value received by this control change message is always in the range
of 0 to 127, but the range is changed in accordance with the setting range of the applicable parameter
setting. Because of this, it is impossible for a value to be outside of the range. Conversion to the
parameter setting value from the value received with the message can be represented in general terms
by the expression shown below.
Parameter Setting Value
=
Parameter Minimum Value
+ (
Parameter Maximum Value
−
Parameter Minimum Value
)
∗
„
Received Value
127
«
7.9
Hold1 (40H)
Message Format:
BnH 40H vvH
n:
MIDI Channel Number
vv:
Value (Note1)
Note1
:
For information about the relationship between setting values and send/receive values, see the “39.1 Off/On Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send
Sent when a pedal that has a sustain (damper) function is operated.
Receive
Receipt performs an operation equivalent to a sustain pedal operation.
Timbre Type Specific Operation
This operation differs in accordance with the Timbre Type (see
“About the Timbre Type” in “8 Program Change”) setting.
•
Timbre Type: Melody, Drawbar, Hex Layer, Solo Synth or User Wave
Sustain off/on control is performed in accordance with the value of the received message.
•
Timbre Type: Drum
The received message does not affect sound source operation.
7.10
Portamento On/Off(41H)(Solo Synthesizer tone selected)
Note
:
This message is valid only when a Solo Synthesizer tone is selected for the the MIDI channel.
Message Format:
BnH 41H vvH
n:
MIDI Channel Number
vv:
Value (Note1)
Note1
:
For information about the relationship between setting values and send/receive values, see the “39.1 Off/On Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Receive
Receipt changes the portamento on/off setting.
15
