Casio XW-G1 Manual Download Page 22

Page: 22 / 111

Receive

Receipt changes the percussion decay time.

7.33

Drawbar Organ Key On Click(57H)(Drawbar tone selected.)

Note

This message is valid only when a drawbar tone is selected for the MIDI channel.

Message Format:

BnH 57H vvH

MIDI Channel Number

vv:

Value (Note1)

Note1

For information about the relationship between setting values and send/receive values, see the “39.1 Oﬀ/On Setting

Value Table” in “VIII Setting Values and Send/Receive Values” of this document.

Receive

Receipt changes the drawbar key on click.

7.34

Drawbar Organ Key Oﬀ Click(58H)(Drawbar tone selected.)

Note

This message is valid only when a drawbar tone is selected for the MIDI channel.

Message Format:

BnH 58H vvH

MIDI Channel Number

vv:

Value (Note1)

Note1

For information about the relationship between setting values and send/receive values, see the “39.1 Oﬀ/On Setting

Value Table” in “VIII Setting Values and Send/Receive Values” of this document.

Receive

Receipt changes the drawbar key oﬀ click.

7.35

Vibrato Rate (59H)(Drawbar tone selected.)

Note

This message is valid only when a drawbar tone is selected for the MIDI channel.

Message Format:

BnH 59H vvH

MIDI Channel Number

vv:

Value (Note1)

Note1

For information about the relationship between setting values and send/receive values, see the “39.2 –64 - 0 - +63

Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.

Receive

Receipt changes the note vibrato rate.

7.36

Vibrato Depth (5AH)(Drawbar tone selected)

Note

This message is valid only when a drawbar tone is selected for the MIDI channel.

Message Format:

BnH 5AH vvH

MIDI Channel Number

vv:

Value (Note1)

Summary of Contents for XW-G1
















































































































Search results

Summary of Contents for XW-G1

Reviews:

Related manuals for XW-G1

Brands by name

Popular brands

Casio XW-G1, Manual

Search results

Summary of Contents for XW-G1

Reviews:

Related manuals for XW-G1

Brands by name

Popular brands