25
Remote Controller
Before you can use the remote controller for the first time, you need to load the two
batteries that come with it. Replace remote controller batteries with a set of new ones
whenever the remote controller does not work or if you need to move the remote controller
very close to the projector before it will work.
To load remote controller batteries
1.
Remove the battery cover from the back of the remote controller.
z
If there are old batteries inside the case, remove them.
Loading Remote Controller Batteries
Caution!
Misuse of batteries can cause them to leak and stain of the area
around them, or to explode, creating the risk of fire and personal injury.
Make sure that you always observe the following precautions.
z
Take care that batteries are oriented correctly when you load them.
z
Never mix old batteries and new ones.
z
Never mix batteries of different types.
z
Use only battery type that is specified for use with the remote
controller.
