Using the Setup Menu
86
■
Input Settings
J
Video Signal, S-Video Signal
This sub-menu specifies the input signal for the projector’s VIDEO and S-VIDEO input
terminals.
Input Source Specific Menu Items
Setting Explanations
Auto:
Select this setting to have the projector switch the video signal system
automatically in accordance with the input signal from the video device
that is connected to the VIDEO or S-VIDEO input terminal. This is the
setting you should normally use.
Other settings: Each setting selects the applicable video system. Use these settings
when you want to specify only one specific video signal for the VIDEO
and S-VIDEO input terminals.
Setting Storage
This setting is saved for the VIDEO and S-VIDEO input terminals only.
Input Source
Available Items (Parentheses indicate defaults.)
RGB
None
Component
S-VIDEO
(Auto), NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
VIDEO
No Signal
(Auto), NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
*
Only when the currently selected input source is VIDEO or
S-VIDEO.
