138
Viewing Snapshots and Movies
.
Selecting the HDMI Terminal Output Method (HDMI Output)
Use this setting to select the digital signal format when connecting to a TV with an
HDMI cable.
1.
In the PLAY mode, press [MENU].
2.
Press [
4
], use [
8
] and [
2
] to select the “
¥
SETTING” tab, and then
press [
6
].
3.
Use [
8
] and [
2
] to select “HDMI Output”, and then press [
6
].
4.
Use [
8
] and [
2
] to select the output method, press [SET].
*
1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required
output method may be 576p when outputting to a digital TV in a PAL reception
area that does not support 1080i 60i. If you are in a PAL reception area and
nothing is displayed automatically, change the setting to 576p.
• If an image does not appear when “Auto” is selected as the output method, try
changing this setting to something else.
IMPORTANT!
• The “HDMI Output” setting cannot be changed as long as there is an HDMI cable
connection between the camera and a TV. Disconnect the HDMI cable from the
camera to change the “HDMI Output” setting.
Auto
This setting will cause the format to change automatically in
accordance with the connected TV. Normally, you should use this
mode.
1080i
1080i format output
*
480p
480p format output
576p
576p format output
