manualshive.com logo in svg

Casio EX-ZR5100, User Manual

Share
Download
Casio EX-ZR5100 User Manual Download Page 76

76

Snapshot Tutorial

1.

Tilt the camera’s monitor screen 180 degrees (page 19).

2.

Hold down the front shutter button to specify the 
Selfie Timer countdown duration.

• You can set a Selfie Timer countdown within the 

range of two to five seconds. The longer you hold 
down the front shutter button, the longer the Selfie 
Timer countdown duration indicated on the monitor 
screen.

3.

Release the front shutter button.

The camera will shoot an image when the countdown reaches zero.

NOTE

• This function cannot be used in combination with some BEST SHOT scenes.
• Selfie Timer cannot be used for movie recording.
• Selfie-timer cannot be used while a Motion Shutter is activated. In this case, 

pressing the front shutter button records with Motion Shutter.

To use the Selfie Timer to shoot a selfie

Summary of Contents for EX-ZR5100























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands