Casio EX-ZR5100 User Manual Download Page 44

Page: 44 / 246

Snapshot Tutorial

The Control Panel can be used to configure camera settings.

In the REC mode, press [SET].

Use [

] and [

] to select the setting item you want to change, and

then press [SET] or [

This will select one of the Control Panel icons and display its settings.

Use [

] and [

] to change the setting.

After the setting is the way you want, press
[SET].

This will apply the setting and return to the REC
mode.

NOTE

• You also can use on-screen menus to configure settings other than those listed

above (page 110).

Using the Control Panel to Configure Camera Settings



Self-timer (page 45)



White balance (page 46)



Focus (page 48)



ISO sensitivity (page 50)



Make-up (page 51)



Exposure (page 52)



Flash (page 53)



Metering (page 55)

Items displayed in the Control Panel depend on the recording mode.

Control Panel

Example: Configuring
Program Auto settings

Summary of Contents for EX-ZR5100























































































































































































































































Search results

Summary of Contents for EX-ZR5100

Reviews:

Brands by name

Popular brands

Casio EX-ZR5100, User Manual

Search results

Summary of Contents for EX-ZR5100

Reviews:

Brands by name

Popular brands