Casio 3506, Operation Manual

Page: 8 / 36

●
Battery Replacement
appears on the display when battery
voltage goes low. Have the battery replaced.
Request battery replacement from a CASIO
service center or your original retailer.
●
When there is a momentarily large load on
the battery, battery voltage will go low and
will flash on the display. All watch button
operation is disabled while is flashing.
Navigating Between Modes
Your watch has the modes shown below.
●
You can also return to the Timekeeping
Mode directly from any mode besides the
Training Mode by holding down (C) for at
least one second, or by pressing (D).
●
In the Timekeeping Mode, pressing (B)
enters the Training Mode.
●
To go from the Training Mode to the
Timekeeping Mode, first stop training
measurement and then press (D).
C
C
C
C
B
D
C
Notification Mode
Timekeeping Mode Training Mode
Timer Mode
Stopwatch Mode
Training Log Mode
Use the buttons in the illustration above to
navigate between modes.
Mode Overview
This section provides an overview of the
modes of your watch.
●
Timekeeping Mode
You can use the Timekeeping Mode to check
the current time and date, and to view your
daily step count, your running distance for a
specific month, and other information. You
can also use this mode to configure Home
City, alarm, and other basic timekeeping
settings.
●
Training Mode
Use this mode to measure and record
distance, elapsed time, pace, and other
running data.
l
Using the Training Function
●
Timer Mode
The timer counts down from a start time
specified by you. The watch performs a sound
and/or vibration operation when the end of the
countdown is reached.
l
Timer
●
Stopwatch Mode
Use this mode to measure elapsed time.
l
Stopwatch
●
Training Log Mode
Use this mode to view recorded training log
data.
l
Viewing Training Log Records
● Notification Mode
The Notification Mode receives incoming call,
mail, and SNS notifications and information.
l
Receiving Phone Notifications
Selecting a Timekeeping
Mode Digital Display Format
Each press of (A) in the Timekeeping Mode
cycles display contents as shown below. Note
that you can display the current time along with
one other type of information.
BASIC: Watch Only (Basic Screen)
TIME+WORLD TIME
TIME+MONTHLY
TIME+DAILY
BASIC: Watch Only (Basic Screen)
Watch Operation Guide 3506
8