Timer
The timer counts down from a start time
specified by you. The watch performs a sound
and/or vibration operation when the end of the
countdown is reached.
●
The sound and/or vibration alert operations
will not be performed while battery power is
low.
Setting a Start Time
The start time can be set in 1-second units up
to 60 minutes.
1.
Enter the Timer Mode.
l
2.
Hold down (A) for at least two seconds.
This displays the number of timer repeats
(1 to 20) setting screen.
Number of repeats
3.
Use (A) and (C) to specify the number of
timer repeats (Auto Repeat).
4.
Press (B).
5.
Use (A) and (C) to specify the position of
the timer in the sequence.
Timer sequence
6.
Press (B).
This moves the cursor to the minutes
setting.
7.
Use (A) and (C) to change the minutes
setting.
Minutes
8.
Press (B).
This moves the cursor to the seconds
setting.
9.
Use (A) and (C) to change the seconds
setting.
Seconds
10.
Press (B).
11.
Use (A) and (C) to select whether or not
you want to save your current settings.
[YES]
Saves current settings.
[NO]
Discards current settings.
[RETURN] Returns to the number of
repeats setting.
12.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timer Mode
screen will re-appear.
Note
●
To exit the timer setting operation at
any point, press (D) and advance to
step 11.
Using the Timer
1.
Enter the Timer Mode.
l
2.
Use the operations below to perform a
timer operation.
B
B
B
(Time up)
Resume
Pause
(Countdown starts)
Start
●
The watch performs a sound and/or
vibration operation for 10 seconds
when the end of the countdown is
reached.
●
You can reset a paused countdown to
its start time, by pressing (D).
3.
Press any button to stop the sound and/or
vibration operation.
Using Programmable Timers
for Interval Training
Overview
You can configure settings for multiple timers
so they perform different count downs one
after the other to create an interval timer. You
can use the programmable timer to create a
sequence for interval training that alternates
jogging with sprinting.
For example, you could configure an interval
timer as shown below and have intervals
A
through
D
repeat 10 times.
Watch Operation Guide 3506
26
