79
3237 • X6 02/2018
OWNER’S MANUAL
SYSTEM OPERATING INFORMATION
7
The ACR switches for the engine batteries and the
thruster/windlass/swim lift batteries are automatic. They
sense battery voltage and automatically engage alternator
12-volt output when the battery voltage reaches a
predetermined low level. The ACRs can also be operated
manually if needed. They can be turned on by first
making sure the yellow switch is turned all the way to
the left and then pushing down on the top of the yellow
switch. The ACR will remain on for 10 minutes after
manual engagement and will then turn off automatically if
predetermined battery voltage levels have been met. The
ACR can be turned off by turning the yellow switch to the
right. When in this position, the ACR is in the LOCKED
OFF position and its automatic function is inoperative.
OTEE:
N
The engine ACR can also be used as a
battery parallel should one of the engine
batteries be consumed to an unusable
voltage level. Whenever the engine ACRs
are engaged, the engine batteries are
paralleled.
DC CONTROL CENTER CIRCUIT
BREAKERS
Never reset a breaker or replace a fuse that has
automatically tripped without first correcting
the problem. Failure to make necessary
corrections may create a dangerous situation.
WARNING
!
The circuit breakers on the DC control center enable
the user to control the DC components by switching
the breakers ON or OFF. All the circuit breakers protect
the electrical system by automatically disconnecting the
circuit from the power source in the event of a short or
overload. The accessory battery supplies power to the
circuit breaker panels.
Thermal circuit breakers are also installed in many circuits
to provide added protection.
OTEE:
N
If a circuit breaker location is labeled,
but no circuit breaker is present, the
component named on the label is an option
that is not installed.
C34_Coupe.indb 79
2/8/2018 3:42:20 PM
