OWNER’S MANUAL
SYSTEM OPERATING INFORMATION
106
7
3237 • X6 02/2018
2 ]
Attach one end of a water hose to the shore water
fitting.
3 ]
Attach the opposite end of the hose to the
dockside water tap.
4 ]
Close all sink and shower faucets.
5 ]
Turn on the AUTO SUMP circuit breakers, located
on the DC control center.
6 ]
Partially open all cold water faucets including sinks,
showers and transom hand shower.
7 ]
Turn the dockside water tap ON.
8 ]
Follow steps 6-10 from
Priming the Water System” on page 103
.
Raw Water Washdowns
(Optional)
The bow and transom raw water washdowns can be
used to wash down and clean the yacht with seawater.
Never operate the washdown pump when the seacock
supplying seawater to the washdown system is closed. The
pump can be damaged by continuing operation without
seawater.
NOTICE
1 ]
Locate the bow- and transom-mounted hose
fittings.
2 ]
Attach one end of an appropriately sized nylon
water hose (with nozzle) to the hose fitting of
choice.
3 ]
Make sure the raw water seacock is closed.
Remove and clean the raw water filter.
4 ]
Reinstall the seawater filter and open the seacock.
If the filter leaks when the seacock is opened, close
the seacock and check the filter for the correct
installation.
5 ]
Open the seacock to supply the seawater to the
washdown pump.
6 ]
Switch ON the WASHDOWN PUMP circuit breaker
located on the DC control center.
DO NOT operate the washdown pump when the seacock
supplying seawater to the washdown system is closed. The
pump can be damaged by continuing operation without
seawater.
NOTICE
The raw water washdown pump, when activated, creates
pressure in the raw water washdown system. When the
hose nozzle is closed, water pressure within the system
increases to the design specifications. Once the pressure
is reached, the pump automatically shuts off. When
the hose nozzle is open and water is released from the
system, the pressure in the system decreases. When
the pressure decreases to the manufacturer’s design
level, the pump automatically turns ON and increases the
pressure. The system settings ensure a steady flow of
water every time the raw water washdown is used.
Bilge Water Pumping
System
Check the function of all bilge pumps at regular intervals.
Clear pump inlets from debris.
The bilge system contains the following bilge pump
quantities based upon region:
North American:
• 2 automatic and manual electric submersible bilge
pumps
C34_Coupe.indb 106
2/8/2018 3:43:16 PM
