Remote System
Usage and maintenance
User Manual
9 / 30
Rev. 01/11/2021
4.3.1
Technical specifications
Weight
12 kg
Maximum Dimensions
526 × 320 × 170 mm
Input voltage
24 V
Maximum current consumption
12 A
Fixing method
Mitchel flat base
Maximum payload
25 kg
Pan/Tilt maximum speed
240 °/s
Pan/Tilt minimum speed
0.24 °/s
Pan range
± 540 ° (unlockable)
Tilt range
± 45 ° (unlockable)
Pan resolution
800.000 count / turn
Tilt resolution
800.000 count / turn
Table 8: e-Rem25 technical specifications.
4.3.2
Overview
Use the holes (2) to reduce the twisting of the cables.
To ensure a secure work environment, each time the head is powered up, Pan and Tilt limits are activated
by default, to unlock them follow the procedure described in §4.2.7.1.
4.3.3
Balancing camera on the remote head
To achieve a better performance of the head, please balance the camera so that the center of gravity (COG)
matches with the center of the Pan/Tilt axes. It is better to do this regulation once all the cables and
accessories are in place.
Adjust the left and right position (5) so that the COG is aligned with the Pan axis, compatibly with the
camera dimensions. This regulation is very important in case of high dynamic movement on the Pan axis.
Position the camera on 90 degree of Tilt (up or down) and regulate the up / down position loosening the
bolts (6); when the camera maintains its balance at 90 degree the right position has been achieved. Tighten
the bolts (6) and bring back the camera on its horizontal position. Loosen the plate lock (8) and move the
camera plate back and forward (7) until the camera is balanced. Tighten the plate lock (8).
A good balance is required to ensure good shots as well as the durability of the product over time.
4.3.4
Lens status led
The lens status led (16) indicates the status of digital lenses (connector 14) and analog lenses (connector
15).
Led color
Description
On
One of the compatible lens has been detected
Blinking
Auto calibration phase
Off
No lens detected
Table 9: Lens status led colors.
