Remote System
Usage and maintenance
User Manual
6 / 30
Rev. 01/11/2021
Technical specifications
Weight
1 kg
Dimensions
217 × 175 × 61 mm
Input voltage
12 ÷ 24 V
Current consumption
1 A
Fixing method
Console bracket (§4.6.10) or leaning on desktop
Table 3: Console technical specifications.
4.2.1
Power switch
The
Power Switch
turn on/off all the devices connected to the console.
Please turn on the power only when all the cables are properly plugged.
4.2.2
Enable button
The
Enable
button toggles the system between enabled and disabled state. A red led on this button is on
when the system is disabled. An external button is available to perform the same function (See §4.5.6).
While disabled, the head maintains its position and every input is ignored.
4.2.3
Direction buttons
The
Direction
buttons change the relative direction of each axis.
4.2.4
Speed knobs
The
Speed
Knobs
set axis velocity. Rotating this knob completely to the left will disable the movement of
the corresponding axis.
Using the e-Cube, the knob on vertical position sets the ratio between the e-Cube and e-Rem25 to 1:1 (i.e.
90° on e-Cube lever corresponds to 90° on the e-Rem25).
4.2.5
Smooth knobs
The
Smooth Knobs
reduce vibrations from input devices.
High settings on this parameter could cause delay in response.
4.2.6
Led indications
4.2.6.1
Status led
Led color
Description
Green
Normal operation
Blue
System disabled: any input is ignored and Settings Mode activated
Red
More input controls are connected than output axes to control
White
More output axes to control are connected than input controls
Light Blue
Problem on the main communication line
Yellow
Waiting for 1st limit to be set (§4.2.7.1)
Purple
Waiting for 2nd limit to be set (§4.2.7.1)
Table 4: Status led colors.
4.2.6.2
Limit led
Led status
Description
On
Limits activated for this axis
Blinking
Limits setting phase
Off
No limits activated for this axis
Table 5: Limit led colors.
