![background image](http://html.mh-extra.com/html/carrier/weatherexpert-50lc/weatherexpert-50lc_installation-instructions-manual_2561507053.webp)
53
m. Press
B
(
Down Arrow)
once to display the
following --
1-25 Motor Nominal Speed
1740rpm
n. Press
OK
to highlight the rpm value and then
use the
Y
and
B
(
Up
and
Down Arrow
) keys
to select the nameplate rpm. Press
OK
again to
set the selected rpm.
6. Entering Parameters for 1--71, 1--73, 1--82, and 1--90:
a. Press the
Menu
key to move the
B
(triangle
icon) so it is positioned over Main Menu. The
display show the following --
0---** Operation / Display
1---** Load and Motor
b. Press
B
(
Down Arrow)
once to highlight the
bottom row.
c. Press
OK
, the display changes to --
1---0* General Settings
1---1* Motor Selection
d. Press
B
(
Down Arrow)
until the following display
appears --
1---6* Load Depen. Setting
1---7* Start Adjustments
e. Press
OK
, the following display appears --
1-71 Start Delay
2.0s
f. Press
OK
to highlight the number and then use
the
Y
and
B
(
Up
and
Down Arrow
) keys to
select the number provided in Table 17. Press
OK
again to set the selected value.
g. Press
B
(
Down Arrow)
twice, the following
display appears --
1-73 Flying Start
[1] Enabled
h. Press
OK
to highlight the number in the bracket
and then use the
Y
and
B
(
Up
and
Down Ar-
row
) keys to select the number provided in Table
17. Press
OK
again to set the selected value.
i. Press the
Back
key once, the following display
appears --
1---6* Load Depen. Setting
1---7* Start Adjustments
j. Press
B
(
Down Arrow)
once, the following
display appears --
1---7* Start Adjustments
1---8* Stop Adjustments
k. Press
OK
, the following display appears --
1-80 Function at Stop
[0] Coast
l. Press
B
(
Down Arrow)
once, the following
display appears --
1-82 Min Speed for Functio…
1.0 Hz
m. Press
OK
to highlight the number and then use
the
Y
and
B
(
Up
and
Down Arrow
) keys to
select the number provided in Table 17. Press
OK
again to set the selected value.
n. Press the
Back
key once, the following display
appears --
1---7* Start Adjustments
1---8* Stop Adjustments
o. Press
B
(
Down Arrow)
once, the following
display appears --
1---8* Stop Adjustments
1---9* Motor Temperature
p. Press
OK
, the following display appears --
1-90 Motor Thermal Prote…
[4] ETR trip 1
q. Press
OK
to highlight the number in the bracket
then use the
Y
and
B
(
Up
and
Down Arrow
)
keys to select the number provided in Table 17.
Press
OK
again to set the selected value.
7. Setting References:
a. Press the
Menu
key to move the
B
(triangle
icon) so it is positioned over Main Menu. The
display show the following --
0---** Operation / Display
1---** Load and Motor
b. Press
B
(
Down Arrow)
three times, the following
display appears --
2---** Brakes
3---** Reference / Ramps
c. Press
OK
, the following display appears --
3---0* Reference Limits
3---1* References
d. Press
OK
again, the following display appears --
3-02 Minimum Reference
0.000
NOTE
: If the bottom row displays a number other than
0.000, press
OK
and use the
Y
and
B
(
Up
and
Down
Arrow
) key to select 0.000.
e. Press
B
(
Down Arrow)
once, the following dis-
play appears --
3-03 Maximum Reference
60.000
NOTE
: If the bottom row displays a number other than
60.000, press
OK
and use the
Y
and
B
(
Up
and
Down
Arrow
) key to select 60.000.
Summary of Contents for WeatherExpert 50LC
