![background image](http://html.mh-extra.com/html/carrier/weatherexpert-50lc/weatherexpert-50lc_installation-instructions-manual_2561507052.webp)
52
3. Clearing Alarm 060: External Interlock:
a. Press the
Menu
key twice to position the
B
(tri-
angle icon) over Main Menu; the display
changes to --
0---** Operation / Display
1---** Load and Motor
b. Press the
B
(
Down Arrow)
key until the follow-
ing display appears --
4---** Limits / Warnings
5---** Digital In/Out
c. Press
OK
. The display changes to --
5---0* Digital I/O mode
5---1* Digital Inputs
d. Press
B
(
Down Arrow)
once to highlight the bot-
tom row and press
OK
. The display changes to --
5---10 Terminal 18 Digital In…
[8] Start
e. Press
B
(
Down Arrow)
twice; the following
display appears--
5---12 Terminal 27 Digital In…
[7] External Interlock
f. Press
OK
to highlight the number in the bracket.
g. Press
B
(
Down Arrow)
until the following display
appears --
5---12 Terminal 27 Digital In…
[0] No operation
h. Press
OK
.
i. Press
Off Reset.
The Alarm indicator disappears.
4. Entering Grid Type:
a. Press the
Menu
key to move the
B
(triangle
icon) so it is positioned over Main Menu. The
display show the following --
0---0* Basic Settings
0---1* Set---up Operations
b. Press
OK
twice: the display changes to --
0---01 Language
[0] English
c. Press
B
(
Down Arrow)
three times, to reach the
following display --
0---06 Grid Type
[102] 200---240V/60Hz
d. Press
OK
to highlight the number in the bracket
and then use the
Y
and
B
(
Up
and
Down
Arrow
) keys to select the desired voltage and
Hertz for the unit.
e. Press
OK
to accept the selection and continue.
5. Entering Motor Data:
a. Press the
Menu
key to move the
B
(triangle
icon) so it is positioned over Main Menu. The
display show the following --
0---** Operation / Display
1---** Load and Motor
b. Press
B
(
Down Arrow)
once to highlight the
bottom row.
c. Press
OK
, the display changes to --
1---0* General Settings
1---1* Motor Selection
d. Press
B
(
Down Arrow)
twice to reach the follow-
ing display --
1---1* Motor Selection
1---2* Motor Data
e. Press
OK
, the following display appears --
1-20 Motor Power
[9] 1.5kW --- 2 hp
NOTE
: The number in the bracket may be different from
what is shown above.
f. Press
OK
and then use the
Y
and
B
(
Up
and
Down Arrow
) keys to scroll to the proper motor
horsepower. Press
OK
again to set the selected hp.
g. Press
B
(
Down Arrow)
once, the following
display appears --
1-22 Motor Voltage
230V
h. Press
OK
to highlight the voltage value. Use the
Y
and
B
(
Up
and
Down Arrow
) keys to select
the nameplate voltage. Press
OK
again to set the
selected voltage.
i. Press
B
(
Down Arrow)
once to display the
following --
1-23 Motor Frequency
60Hz
j. Press
OK
to highlight the Frequency value and
then use the
Y
and
B
(
Up
and
Down Arrow
)
keys to select the nameplate Hz. Press
OK
again
to set the selected Hz.
k. Press
B
(
Down Arrow)
once to display the
following --
1-24 Motor Current
6.61A
l. Press
OK
to highlight the Current value and
then use the
Y
and
B
(
Up
and
Down Arrow
)
keys to select the Max Amps value provided.
Press
OK
again to set the selected Max Amps.
NOTE
: The Max Amps is greater than the nameplate
value. Check the VFD Unit Parameters (see Table 17 on
page 57) and use the value listed for the given unit in the
column labeled “Motor Current Must--Hold Amps”.
Summary of Contents for WeatherExpert 50LC
