Appendix A: VAV Zone II Points/Properties
VAV Zone II Controllers
CARRIER CORPORATION ©2019
Installation and Start-up Guide
All rights reserved
79
Setpoints for ZS Sensors
To configure setpoint properties for ZS sensors, CTRL+click anywhere on the
Zone
Setpoints:
graph at the top of the
Setpoints
section in order to access the
Properties
popup.
In the popup, select the
Properties
>
Sensor
tab to configure ZS sensors for
Setpoint
Adjust
.
Edit Increment
– Amount of offset in degrees for each press of the up or down arrows
on the ZS Sensor for setpoint adjustment.
D:
R:
1
0.1
0.5
1
Allow Setpoint Adjustment
– Check to allow setpoint adjustments on the specified ZS
sensor.
D:
R:
(1) enabled
disabled/enabled
Sensor Setpoint Adjust Option
– Check to select the ZS setpoint adjustment display.
D: 3
Summary of Contents for VAV Zone II
Page 109: ......
