Carrier VAV Zone II, Installation And Startup Manual

Page: 67 / 110

To adjust the driver properties
VAV Zone II Controllers CARRIER CORPORATION ©2019
Installation and Start-up Guide All rights reserved
63
Specific Events
On these pages, you can enable/disable, change BACnet alarm properties, or set delays for the following BACnet
alarms:
Specific alarms:

Flow Control Alarm

Reheat Valve Alarm (future use)
NOTES

To set up alarm actions for controller generated alarms, see See Alarms in i-Vu® Help.

Reheat Valve Alarms are for future use.
Module Generated Alarm
Description Short message shown on the i-Vu® Alarms page or in an alarm action when this
type of alarm is generated.
Events
Alarm Category and Alarm
Template See Alarms in i-Vu® Help.
Enable Clear these checkboxes to disable Alarm or Return to normal messages of this
type from this controller.
Notification Class Do not change this field.
Switches, Jumpers, Options
The Switches, Jumpers, Options page shows the current physical settings on the VAV Zone II.
Flow Calibration Archive
The Flow Calibration Archive page shows measured flow and sensor readings that were entered in the i-Vu® Test
and Balance tool.