Addressing the TV-UCXP683T-V through the Service port
TruVu™ UCXP683T
-V
CARRIER CORPORATION ©2021
Installation and Start-up Guide
All rights reserved
9
The TV-UCXP683T-V is addressed using the controller setup pages. The
Local Network
tab allows you to discover
all i-
Vu® XT or TruVu™ devices on a single network and configure them from that page. See
Addressing a network
of controllers using the controller setup Local Network tab
(page 13) and the
Local Network
(page 51) tab.
You can connect the TV-UCXP683T-V to a computer one of two ways.
NOTE
You cannot access the Service port by plugging an Ethernet cable into Eth0 or Eth1.
To connect the TV-UCXP683T-V to a computer using the Carrier wireless service adapter.
1
Insert the Carrier wireless service adapter (part# USB-W) into the controller's USB Service Port to
communicate with a Wi-Fi-compatible computer.
CAUTION
If the Eth1 port is in use, connect a USB Type-A Male to Female extension cable to the USB
Service Port and the Carrier wireless service adapter.
2
Open your computer's wireless network display to view your available wireless networks.
NOTE
TV-UCXP683T-V only supports the 5 GHz band and not the 2.4 GHz band.
3
Connect to the wireless network using the network SSID and password that are printed on the Carrier
wireless service adapter.
4
Open a web browser on the computer and navigate to http://local.access or http://169.254.1.1 to see the
controller setup pages.
Addressing the TV-UCXP683T-V through the Service port
Summary of Contents for TruVu UCXP683T-V
Page 75: ......
Page 76: ...Carrier 2021 Catalog No 11 808 850 01 12 3 2021...
