Troubleshooting
TruVu™ UCXP683T
-V
CARRIER CORPORATION ©2021
Installation and Start-up Guide
All rights reserved
65
To replace the fuse:
1
Remove the red power connector.
2
On both ends of the TV-UCXP683T-V, insert a small flathead screwdriver as shown below, and then gently pry
up the cover until it is released from the base.
3
Remove the cover from the base.
4
Remove the blown fuse.
5
Snap the new fuse into the fuse holder.
6
Replace the TV-UCXP683T-V's cover.
7
Replace the power connector.
8
Verify the
LEDs on the TV-UCXP683T-V are lit.
To revert to default settings
WARNING
This erases all archived information and user-configuration settings. When recovery is complete,
you have to reconfigure all custom settings. You must connect locally to the TV-UCXP683T-V and manually
reconfigure all the communications and firewall information. We highly recommend that you revert the defaults
settings only under the guidance of Carrier Control Systems Support.
To erase volatile memory data and restore factory default configuration settings, use AppLoader to download the
appropriate clipping.
See the
AppLoader User Guide
for details.
Summary of Contents for TruVu UCXP683T-V
Page 75: ......
Page 76: ...Carrier 2021 Catalog No 11 808 850 01 12 3 2021...
