7
4 - SETTING UP THE TOUCH PILOT USER INTERFACE
4.1 - User interface
The user interface is a numerical 800 x 480 mm touch screen.
Navigation is either directly from the touch screen interface
or by connecting to a web interface at the IP port of the controller.
The navigation menus are the same for both connection
methods. Only two web connections are authorised by the
interface at the same time.
4.2 - Web connection
Connection is from a PC using a web browser with Java.
To connect to the Touch Pilot control, enter the IP address
of the unit in the address bar of the web browser.
Unit default address: 169.254.0.1.
Minimum web browser confi guration:
•
Microsoft Internet Explorer version 8 or Mozilla Firefox
version 26 or higher (in the advanced connection
options add the unit address to the address list. Do
not use a proxy server).
•
Java platform version 6 or higher (in the control panel
untick the option that allows storing temporary internet
fi les and use a direct connection).
For more information on the web browser and Java platform
confi guration refer to
the applicable Carrier documentation and
contact your network administrator.
Two users can be connected simultaneously, with no priority
between users; the last modifi cation is taken into account.
4.3 - General features
4.3.1 - Buttons
Unit is
running or in
standby
Unit is off
Home
Access to
menus
Not logged
in
Logged
in
No alarm
Alert
Alarm
Back
Previous
page
Next
page
More
information
Click this button
Value which can be
modifi ed
4.3.2 - Screens
The interface includes different screens that are listed below:
•
Welcome screen,
•
Synoptic screen with direct display of the main
parameters,
•
Menu screens for navigation,
•
Data/confi guration screens listing the parameters by type,
•
Operating mode selection screen,
•
Password entry and language selection screen,
•
Parameter modifi cation screen,
•
Time schedule screen.
NOTE: If the interface is not used for a long period, it will
go blank. The control is always active, the operating mode
remains unchanged. The interface screen is re-animated, when
the user presses the screen. The welcome screen is displayed.
4.3.3 - Welcome screen
The welcome screen is the fi rst screen shown after switching
the unit on or after re-animation of the screen. It displays
the application name as well as the applicable software
version number.
To exit from this screen press button
Home button
Software version number
1
Condenser water inlet and outlet
2
Evaporator water inlet and outlet
3
Setpoint
4
Condenser pump status
5
Evaporator pump status
6
Unit capacity percentage
7
Synoptic screen access button
8
Menu access button
9
Connection/language screen access button
10
Start/stop screen access
11
Alarm menu access
4.3.4 - Synoptic screen
①
②
③
④
⑤
⑥
⑦ ⑧
⑨ ⑩ ⑪
