Installation
10
Window Installation Kit
Press the exhaust hose into the window slider adaptor
and unit adaptor, clamp automatically by elastic buckles
of the adaptors.
Step One: Preparing the Exhaust Hose assembly
Step Two: Install the Exhaust hose assembly to the unit
Insert unit adaptor of the Exhaust hose assembly into the
lower groove of the air outlet of the unit while the hook of
the adaptor is aligned with the hole seat of the air outlet
and slide down the Exhaust hose assembly along the arrow
direction for installation.
Unit adaptor
Window slider
adaptor
Exhaust hose
Press into
Press into
Exhaust hose
assembly
or
Make sure the hook of the adaptor is aligned
with the hole seat of the air outlet.
Hook
Hole Seat
Lower groove
adaptor
Make sure the adaptor is
inserted into the lower
groove of the air outlet.
Step Three: Preparing the Adjustable Window Slider
1. Depending on the size of your window, adjust the size of the
window slider.
2. If the length of the window requires two window sliders, use the bolt
to fasten the window sliders once they are adjusted to the proper
length.
3. For some models, if the length of the window requires three window
sliders(optional), use two bolts to fasten the window sliders once they
are adjusted to proper length.
Window slider A
MODEL A
MODEL A
MODEL B
MODEL B
Window slider B
Bolt
Window slider A
Window slider B
Bolt
or
or
Window slider A Window slider B Window slider C
Bolts
Window slider A Window slider B Window slider C
Bolts
Other Regions
Part
Description
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
2 pc
1 pc
1 pc
1 pc
2 pc
1 set
1 set
Unit Adaptor
Window Slider Adaptor
Window Slider A
Window Slider B
Exhaust Hose
Bolt
Foam Seal A (Adhesive)
Foam Seal B (Adhesive)
Foam Seal C (Non-adhesive)
Security Bracket and Screw
Drain Hose
Drain Hose Adaptor(only for
heat pump mode)
Quantity
Part
Description
Quantity
Remote Controller
and Battery
O
N
/O
FF
TE
M
P
SH
O
RT
CU
T
TI
M
ER
O
N
TI
M
ER
O
FF
M
O
DE
FA
N
SL
EE
P
SW
IN
G
LE
D
4 set
Wall Exhaust Adaptor A
(only for wall installation)
Wall Exhaust Adaptor B(with cap)
(only for wall installation)
Screw and anchor
(only for wall installation)
NOTE: Items with are optional. Slight variations in design may occur.
*
*
*
*
*
*
*
*
*
*
*
*
Power Cord Buckle
GB
