Carrier i-Vu XT, Installation And Startup Manual

Page: 43 / 50

i-Vu® XT Router (drv_gen5) CARRIER CORPORATION ©2022
Installation and Start-up Guide 40 All rights reserved
To replace the fuse:
1
Turn off the router's power.
2
Remove the red power connector.
3
On both ends of the router, insert a small flathead screwdriver as shown below, and then gently pry up the
cover until it is released from the base.
4
Remove the cover from the base.
5
The fuse labeled F1 is located near the power connector. Use a fuse puller to remove the fuse.
6
Use the fuse puller to snap the new fuse into the fuse holder.
7
Replace the router's cover.
8
Replace the power connector.
9
Turn on the router's power switch.
10
Verify that the LED on top of the router is on.