GB - 5
AQUASMART Room Controller
E N G L I S H
Access to the configuration menu
Press and hold down the “
MODE
” button for around 5 seconds
until “1-” appears on the display..
This indicates that the user could set configuration item
number 1.
1- FAHRENHEIT OR CELSIUS: SELECTION
Select between Fahrenheit (F) or Celsius (C) operation.
Factory default is Celsius.
To select while in configuration mode:
• The Configuration Option (“1-”) and the current selection
should be displayed.
• Press the “
MODE
” button to alter the current selection.
• Use either the “
UP
” or “
DOWN
” button to change between “F” or “C”.
• To end configuration do not press any buttons for 10 seconds.
To move to the next setting, press the “
UP
” button again and the
“2-” will be displayed.
Press the “
DOWN
” button and the display will change to “1-”.
up
down
up
down
2- AIR SENSOR SELECTION
Program if you want to use the air temperature sensor
present in the Room Controller “On” or the one present in the
units “OF”.
The default setting is OF.
To select while in configuration mode:
• Press “
UP
” botton until “2-” is displayed.
• Press the “
MODE
” button to change the current selection
• Use either the “
UP
” o “
DOWN
” to change between “OF” (OFF)
and “On”(ON).
• To end configuration do not press any buttons for 10 seconds.
3- UNIT TYPE
It allows to determine appropriately which unit type is
connected to the Room Controller.
To select while in “
UNIT
CONFIGURATION
” mode:
• Press and hold down the “
UP
” and “
DOWN
” keys at the same
time for around 5 seconds, until “-2” appears on the display.
• Press “
MODE
” button to alter the current selection (the “-” will
disappear).
up
down
up
down
Room Controller configuration
up
down
