![background image](http://html1.mh-extra.com/html/carrier/appcontroller-opn-app/appcontroller-opn-app_installation-and-startup-manual_2562431015.webp)
Installing the AppController
AppController
CARRIER CORPORATION ©2019
Installation and Start-up Guide
All rights reserved
9
To wire inputs and outputs
Pull the screw terminal connector from the controller's power terminals labeled
Gnd
and
Hot
.
1
Connect the input wiring to the screw terminals on the AppController.
NOTES
○
Connect the shield wire to the
GND
terminal with the ground wire.
○
IN-5
and
IN-6
share the
GND
terminal above
IN-5
.