![background image](http://html1.mh-extra.com/html/carrier/69nt40-541-505/69nt40-541-505_operation-and-service-manual_2563843043.webp)
4–13
T-368
A Pre-trip test may be initiated by use of the keypad or
via communication, but when initiated by communica-
tion the controller will execute the entire battery of tests
(auto mode).
At the end of a pre-trip test, the message “P,” “rSLts”
(pretest results) will be displayed. Pressing ENTER will
allow the user to see the results for all subtests. The
results will be displayed as “PASS” or “FAIL” for all the
tests run to completion.
A detailed description of the pre-trip tests and test
codes is provided in
. Detailed operating
instructions are provided in
.
4.8
DATACORDER
The Carrier Transicold “DataCORDER” software is
integrated into the controller and serves to eliminate
the temperature recorder and paper chart. Data-
CORDER functions may be accessed by keypad selec-
tions and viewed on the display module. The unit is
also fitted with interrogation connections (see
). A personal computer with Carrier Transicold
DataLINE software may also be used to download data
and configure settings.
The resulting file uses a proprietary file format that pro-
tects it from potential tampering or altering of data.
Therefore, once downloaded, all dcx files shall be con-
sidered secured. The DataCORDER consists of:
The DataCORDER consists of:
• Configuration Software
• Operational Software
• Data Storage Memory
• Real Time Clock (with internal battery backup)
• Six Thermistor Inputs
• Interrogation Connections
• Power Supply (battery pack)
The DataCORDER performs the following functions:
a. Logs data at 15, 30, 60 or 120 minute intervals
and stores two years’ of data (based on one
hour interval).
b. Records and displays alarms on the display
module.
c. Records results of Pre-trip testing.
d. Records DataCORDER and temperature control
software generated data and events as follows:
• Container ID Change
• Software Upgrades
• Alarm Activity
• Battery Low (Battery Pack)
• Data Retrieval
• Defrost Start and End
• Dehumidification Start and End
• Power Loss (with and without battery pack)
• Power Up (with and without battery pack)
• Remote Probe Temperatures in the Con-
tainer USDA cold treatment and cargo probe
recording)
• Return Air Temperature
• Set Point Change
• Supply Air Temperature
• Real Time Clock Battery (Internal) Replace-
ment
• Real
−
Time Clock Modification
• Trip Start
• ISO Trip Header (When entered via Interro-
gation program)
• Economy Mode Start and End
• “Auto 1/Auto 2/Auto 3” Pre-trip Start and End
• Bulb Mode Start
• Bulb Mode changes
• Bulb Mode End
• USDA Trip Comment
• Humidification Start and End
• USDA Probe Calibration
• Fresh Air Vent Position
4.8.1
DataCORDER Software
The DataCORDER Software is subdivided into Opera-
tional Software, Configuration Software, and the Data
Memory.
a. Operational Software (dC Function Codes)
The Operational Software reads and interprets inputs
for use by the Configuration Software. The inputs are
labeled Function Codes. Controller function codes (see
), allow the operator to examine the current
input data or stored data. To access these codes, do
the following:
1. Press the ALT. MODE and CODE SELECT keys.
2. Press an arrow key until the left window displays
the desired code number. The right window will
display the value of this item for five seconds
before returning to the normal display mode.
3. If a longer time is desired, press the ENTER key
to extend the time to 30 seconds.
b. Configuration Software
The configuration software controls the recording and
alarm functions of the DataCORDER. Reprogramming
to the factory-installed configuration is achieved via a
configuration card. Changes to the software may be
made using the DataLINE integration software.
Downloaded from
Summary of Contents for 69NT40-541-505
