Carrier 69NT40-541-505, Operation And Service Manual

Page: 77 / 143

4–47 T-368
Table 4–8 DataCORDER Function Code Assignments
NOTE
Inapplicable Functions Display “-----”
To Access: Press ALT. MODE key then CODE SELECT key
Code No. TITLE DESCRIPTION
dC1
Recorder Supply
Temperature
Current reading of the supply recorder sensor.
dC2
Recorder Return
Temperature
Current reading of the return recorder sensor.
dC3-5 USDA 1,2,3 Temperatures Current readings of the three USDA probes.
dC6-13 Network Data Points 18
Current values of the network data points (as configured). Data point 1
(Code 6) is generally the humidity sensor and its value is obtained from
the Controller once every minute.
dC14 Cargo Probe 4 Temperature Current reading of the cargo probe #4.
dC15-19 Future Expansion These codes are for future expansion, and are not in use at this time.
dC20-24
Temperature Sensors 15
Calibration
Current calibration offset values for each of the five probes: supply, re-
turn, USDA #1, #2, and #3. These values are entered via the interroga-
tion program.
dC25 Future Expansion This code is for future expansion, and is not in use at this time.
dC26,27 S/N, Left 4, Right 4
The DataCORDER serial number consists of eight characters. Function
code dC26 contains the first four characters. Function code dC27 con-
tains the last four characters. (This serial number is the same as the
Controller serial number)
dC28 Minimum Days Left
An approximation of the number of logging days remaining until the Data
CORDER starts to overwrite the existing data.
dC29 Days Stored Number of days of data that are currently stored in the DataCORDER.
dC30 Date of last Trip start
The date when a Trip Start was initiated by the user. In addition, if the
system goes without power for seven continuous days or longer, a trip
start will automatically be generated on the next AC power up.
dC31 Battery Test
Shows the current status of the optional battery pack.
PASS : Battery pack is fully charged.
FAIL : Battery pack voltage is low.
dC32 Time: Hour, Minute Current time on the real-time clock (RTC) in the DataCORDER.
dC33 Date: Month, Day Current date (month and day) on the RTC in the DataCORDER.
dC34 Date: Year Current year on the RTC in the DataCORDER.
dC35 Cargo Probe 4 Calibration
Current calibration value for the Cargo Probe. This value is an input via
the interrogation program.
Downloaded from ManualsNet.com search engine