Carrier 69NT40-541-505, Operation And Service Manual, Page: 140 / 143

T-368 Index –2
First Aid 1–1
Fresh Air Makeup Vent 3–1
Frozen “Heat” Mode 4–8
Frozen Economy Mode 4–8
Frozen Idle Mode 4–8
Frozen Mode - Temperature Control 4–7
Frozen Mode Cooling − Sequence of Operation 4–9
Frozen Steady State 4–7
G
General Description 3–1
General Safety Notices 1–1
Generator Protection 4–11
Gutters 2–2
H
Handles 2–2
Handling Controller 7–20
High Pressure Switch 7–10
I
Inspection (Before Loading) 5–1
Interrogator 2–2
Introduction 2–1
ISO Trip Header 4–18
K
Keypad 4–2
L
Labels 2–2
Logging Interval (dCF03) 4–14
Lower Air (Fresh Air Make Up) 2–2
M
Maintenance of Painted Surfaces 7–26
Maintenance Precautions 1–1
Manifold Gauge Set 7–1
Modes of Operation 4–4
O
Operating Precautions 1–1
Operational Software (Cd Function Codes) 4–4
Option Descriptions 2–1
P
Perishable Economy 4–6
Perishable Heating 4–4
Perishable Idle, Air Circulation 4–4
Perishable Mode Cooling − Sequence of Operation 4–6
Perishable Mode Dehumidification 4–5
Perishable Mode Heating − Sequence of Operation 4–7
Perishable Mode Temperature Control 4–4
Perishable Pulldown 4–4
Perishable Steady State 4–4
Perishable, Dehumidification − Bulb Mode 4–6
Physical Inspection 5–3
Plate Set 2–1
Pressure Readout 2–1
Pre-trip Data Recording 4–16
Pre-Trip Diagnostics 4–12
,
5–3
Probe Diagnostics 5–4
Protection Modes of Operation 4–11
Pump the Unit Down 7–3
Q
Quest − CCPC 2–2
,
4–11
R
Refrigerant Charge 7–4
Refrigerant Leak Checking 7–3
Refrigeration Circuit 3–9
Refrigeration System Data 3–6
Refrigeration Unit − Front Section 3–1
Remote Monitoring 2–2
Removal and Replacement of Compressor 7–5
Removing and Installing the Controller 7–22
Replacing High Pressure Switch 7–11
S
Safety and Protective Devices 3–8
Sampling Type (dCF05 & dCF06) 4–16
Section Layout 7–1
Sensor Checkout Procedure 7–23
Sensor Configuration (dCF02) 4–14
Sensor Re-Installation 7–25
Sensor Replacement 7–24
Service Valves 7–2
SMV Emergency Repair Procedure 7–20
Specific Hazard Statements 1–1
Start Temperature Recorder 5–3
Starting and Stopping Instructions 5–2
Starting the Unit 5–3
Start-Up Inspection 5–3
Stopping the Unit 5–3
Suction Modulation Valve 7–18
Downloaded from ManualsNet.com search engine