Carrier 40VC009F-7S-QEE, Installation And Owner'S Manual, Page: 26 / 154

Electrical Wiring
(B) Definition and description ofSW03
SW03_1 Address setting mode
[1] Address setting mode
0 Automatic setting (default)
1 Code-set address
SW03_2
~
SW03_8
Code-setindoor
unit address
andcentralized
controller address
(Note*)
[2] [3] [4] [5] [6] [7] [8] Address of
indoor unit
Address ofcentralized
controller
0 0 0 0 0 0 0 0# (Default) 0# (Default)
0 0 0 0 0 0 1 1# 1#
0 0 0 0 0 1 0 2# 2#
… … … … … … … … …
0 1 1 1 1 1 1 63# 63#
1 0 0 0 0 0 0 0# 64#
1 0 0 0 0 0 1 1# 65#
1 0 0 0 0 1 0 2# 66#
… … … … … … … … …
1 1 1 1 1 1 1 63# 127#
Note*:
• Set the address by code when connecting the centralized controller or gateway or chargesystem.
• Address of the centralized controller=communication 0or +64.
• SW03_ 2=OFF, address of the centralized controller=communication 0=communication address
• SW03_ 2=ON, address of the centralized controller=communication 64 (applies when the centralized controller
is used and there are more than 64 indoor units).
• To use with 0010451181A in use, using code for address setting is required. SetSW03_1=0N
andSW03_2=OFF;SW03_3,SW03_4,SW03_5,SW03_6,SW03_7,andSW03_8are address codes that are set according
to the actualaddress.
• The address-setting function of the wired controller for ultrathin card machines isdisenabled.
19
English