![background image](http://html1.mh-extra.com/html/carrier/40vc009f-7s-qee/40vc009f-7s-qee_installation-and-owners-manual_2562008018.webp)
¢
¢
¢
CAUTION:
Drain pipe ought to be positioned high inside and low outside.
(5) Air Conditioner Installation Diagram
Installation Procedures
Hanger Chain Hook
2) Installing Status of Mounting Rack
Hanger bolt
Hexagon Bolt
Mounting Rack
Ceiling
Ceiling
Wall
Levelling is forbidden after the air conditioner is installed;
please make adjustments according to the diagram.
≤40mm
Bolt Sleeve
M10
Flat Spacer
Double Nut
Unit
Hanger bolt is 40mm below ceiling.
Installing the Air Conditioner
Drain Pipe Leading-out Direction
Mounting Rack
Insert the hexagon bolt into its slot
Tighten the hexagon bolt to fix the air conditioner
According to the requirements on the site, drain pipes shall
be prepared by users on their own and ensurethat these are
connected to the drain pipes already available with the unit
(ensure that measures are in placeto guard against water
leakage in junction areas); heat insulation shall be available
in case of certain indoor drain pipes using heat insulant to
prevent condensation.
(6) Installing Deco Plate and Inlet Grille (after pipeline laying and electric wiring are done).
Attention
For normal drainage, the water drainage piping should be connected as per the instructions in the installation manual.
Heat insulation should be perform edto avoid condensation. Improper pipe connection may lead to the water entering
the machine.
Requirements:
• The water drainpipes of the indoorunits should be heat insulated.
• Heat preservation should be ensured for the connection with the indoor units. Improper heat preservation may cause
condensation.
• The drainpipe should be designed with a down gradient of 1/100. The midway of the elbow shouldn’t be in S shape or
abnormal noise may beoccur.
• The lateral length of the drainpipe should be within 20m. In case of a long pipe, a support should be provided every
1.52~2m to avoidan uneven condition.
• The central piping should be connected according to the followingfigure.
• Don’t apply external force to the connection ofdrainpipes.
11
English
Summary of Contents for 40VC009F-7S-QEE
Page 29: ...The manufacturer reserves the right to change any product specifications without notice...
Page 54: ...Il produttore si riserva il diritto di modificare le specifiche del prodotto senza preavviso...
Page 79: ...Le fabricant se r serve le droit de modifier les sp cifications du produit sans pr avis...
Page 104: ...Der Hersteller beh lt sich das Recht vor Produktspezifikationen ohne Vorank ndigung zu ndern...