11
Individual setting in a zone
An indoor unit entered in a zone can be started/stopped with the individual set-up contents.
[Example] Start (or Stop) the Unit No.2 air conditioner in the Zone No. 1 (Units No. 1 to 5 are set.).
1
Selection of MONITOR/SET
Push “MONITOR/SET” button to match to
“SET”. “MONITOR” indication goes off and
“SET” indication flashes.
2
Selection of ALL/ZONE/UNIT
Push “ALL/ZONE” button to indicate “ZONE”.
(NOTE) Every pushing the button, indication
changes in the following order.
3
Selection of ZONE No.
Push “ZONE” button to match to ZONE No. to
be set.
Unit No. entered in the indicated zone is indi-
cated in the Operation monitor indication part.
Indication of each setting such as MODE
indicates the setting status of the smallest Unit
No. in the zone.
4
Selection of UNIT No.
Push “UNIT” button to match to UNIT No. to be
set.
UNIT No. in the Operation monitor indication
part flashes.
(UNIT No. 01 to 05 only are indicated.)
5
Selection of Last-push priority/CENTER/
LOCKED
Push “CENTER/LOCKED” button to match
indication to “No indication (Last-push prior-
ity)”, “CENTER” or “LOCKED”.
(NOTE) Every pushing the button, indication
changes in the following order.
6
SET
Match MODE, FAN, TEMP., LOUVER, etc.
(For details, see pages 15 to 16.)
7
ON/OFF
ON
Push “ON” button.
“ON” indication goes on.
OFF
Push “OFF” button.
“OFF” indication goes on.
FILTER RESET
1
SET
ZONE
CENTER
TIMER
OFF
MODE
COOL
ON
2 3 4 5
FAN
HIGH
TEMP.
˚C
LOUVER
LOUVER
FAN
TEMP.
MODE
MONITOR/SET ALL/ZONE
ZONE
UNIT
ON CENTER/LOCKED
CHECK
ZONE SET/ENTER SELECT
OFF
TIMER ON
4
5
1 2
3
FILTER RESET
1
SET
ZONE
CENTER
TIMER
OFF
MODE
COOL
ON
2 3 4 5
FAN
HIGH
TEMP.
˚C
LOUVER
LOUVER
FAN
TEMP.
MODE
MONITOR/SET ALL/ZONE
ZONE
UNIT
ON CENTER/LOCKED
CHECK
ZONE SET/ENTER SELECT
OFF
TIMER ON
6
7
6
6 6
ALL
ZONE
UNIT
No indication
Last-push
priority
CENTER
LOCKED
( )
END
Selection of MONITOR/SET
Push “MONITOR/SET” button again to match to
“MONITOR”.
“SET” indication goes off, and “MONITOR” indication
goes on.
• Indication returns automatically to “MONITOR”
after 15 seconds even if END step is not executed,
and setting operation completes.
• In setting ON/OFF only of the air conditioner,
operation in steps
5
and
6
is unnecessary.
