5
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
1
MONITOR
SET
ZONE
ALL
CENTER
LOCKED
AUX. TYPE
TIMER No.
STANDBY
FILTER
ON
OFF
MODE
FAN ONLY
COOL
DRY
HEAT
AUTO
UNIT
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
FAN
AUTO
HIGH
MED.
LOW
FIX
TEMP.
CHECK
1
2
˚C
LOUVER
MANUAL
Indicated while the discharge
louver automatically operates.
(Display disappears when the
operation stops.)
LOUVER indication
Indicated when operation is
disabled in case of using the air
conditioner as Multi type.
STANDBY indication
Indicated when operation by
weekly timer or timer on the market
becomes available.
TIMER indication
Indicates the operation status of the remote controller
at indoor unit side.
Last-push priority/Center/Locked indication
Indicates the selected fan mode.
FAN indication
Indicates the selected unit No.
UNIT No. indication
Indicates the connected unit No. and
the operation status.
Operation monitor indication
“MONITOR” is displayed in normal
time. “SET” is displayed with flashing
while setting Start/Stop/every setting.
MONITOR/SET indication
Indicates the selected zone No.
ZONE No. indication
Indicates that start/stop/every set up
operations are performed for all units,
zone, or individual unit.
ALL/ZONE/UNIT indication
Indicates that the air conditioner of
which unit No. is displayed is ON or OFF.
ON/OFF indication
Indicates the selected operation mode.
MODE indication
Indicates the selected
set up temperature.
TEMP. indication
Indicated while the
mode is CHECK mode.
CHECK indication
When this indication goes
on, clean the air filter.
(For details, see p.17.)
FILTER indication
Indication section
Indication examples show all the contents for explanation.
In practice, the selected contents are displayed.
(NOTE)
Setting of last-push priority/Center/Locked are as described below.
Last-push priority/
Center/
Locked indication
Operation propriety of remote controller
at indoor unit side and indication
“CENTRAL” indication
No display
(Last-push priority)
Operable from both central remote controller and remote controller at indoor
unit side.
Goes off
CENTER
Contents set from central remote controller are fixed. Start/Stop and timer
set up only can be operated from remote controller at indoor unit side.
Goes on
LOCKED
Contents set from central remote controller are fixed, and the air conditioner
stops. Operation from remote controller at indoor unit side is disabled.
Flashes
