Transport et levage
3
Levage
Méthode de levage
Veillez à ce que l'unité ne penche pas pendant le levage.
1. Ne retirez pas l’emballage extérieur (strictement déconseil
-
lé) Soulevez la machine à l’aide de deux filins comme illustré
ci-contre.
filin
Plus de 60°
0,7 à 1,0 mètre
Ne retirez pas le
ruban adhésif et
la boîte d’embal-
lage
Passez les
sangles à travers
les ouvertures de
la base en bois
comme illustré.
Poignée encas-
trée
Base en bois
Centre
Poignée
encastrée
N’inclinez pas la
machine de plus
de 20°
• Ne placez aucun objet sur l’appareil.
• Utilisez les 2 filins pour soulever l’unité extérieure.
ATTENTION
ATTENTION
ATTENTION
Manutention manuelle
• Soulevez lentement et progressivement l’unité
pour assurer la sécurité du personnel.
• Utilisez des matériaux amortissants comme des
chiffons ou un carton pour protéger l’unité exté
-
rieure pendant le levage.
• Ne placez aucun objet sur l’unité extérieure lors de l’installation et de la mise en service : un corps étranger
pourrait entrer à l’intérieur de l’appareil et provoquer un incendie ou un accident.
Observez les consignes suivantes lorsque vous manipulez l’équipement à la main.
1. Ne détruisez pas la base en bois
2. Veillez à ne pas renverser l’unité extérieure : maintenez le centre de gravité de l’appareil comme indiqué sur
la figure.
3. Deux personnes ou plus sont nécessaires pour transporter la machine.
3
English
Transportation and Lifting
Lifting
In front of the unit shipped from unpacking location as
close as possible.
CAUTION
Do not place anything on the device.
Two ropes shall be used for lifting the outdoor unit.
Hoisting method
Hoisting to ensure that the level of outdoor machine, slowly
lifting.
1. Removal of outer packing is strictly prohibited
2. As shown by two ropes hoist with outdoor machine
packaging.
CAUTION
In order to ensure safety, maintain the level of lifting,
slowly lifting.
Do not lift the elevator to the packing and outer packing
of the equipment.
External protection should be used when lifting, such
as cloth or cardboard.
Manual handling
CAUTION
In the installation and commissioning, the outdoor machine do not put any irrelevant material, to ensure that there is
no debris inside the machine, or there may be a fi re or accident.
Pay attention to the following points when handling the equipment manually:
1. No demolition wood base.
2. In order to prevent the dumping of the outdoor machine, the center of gravity of the unit should be noted as shown in
the fi gure.
3. Two or more people to carry out the outdoor machine.
rope
Over 60 degrees
0.7~1.0 meters
Do not remove
packing tape and
packing box.
As shown in the
rope through the
wood base around
the lifting hole.
Handle hole
Wood base
This product maximum tilt
angle 20 degrees.
Focus Handle
hole
3
English
Transportation and Lifting
Lifting
In front of the unit shipped from unpacking location as
close as possible.
CAUTION
Do not place anything on the device.
Two ropes shall be used for lifting the outdoor unit.
Hoisting method
Hoisting to ensure that the level of outdoor machine, slowly
lifting.
1. Removal of outer packing is strictly prohibited
2. As shown by two ropes hoist with outdoor machine
packaging.
CAUTION
In order to ensure safety, maintain the level of lifting,
slowly lifting.
Do not lift the elevator to the packing and outer packing
of the equipment.
External protection should be used when lifting, such
as cloth or cardboard.
Manual handling
CAUTION
In the installation and commissioning, the outdoor machine do not put any irrelevant material, to ensure that there is
no debris inside the machine, or there may be a fi re or accident.
Pay attention to the following points when handling the equipment manually:
1. No demolition wood base.
2. In order to prevent the dumping of the outdoor machine, the center of gravity of the unit should be noted as shown in
the fi gure.
3. Two or more people to carry out the outdoor machine.
rope
Over 60 degrees
0.7~1.0 meters
Do not remove
packing tape and
packing box.
As shown in the
rope through the
wood base around
the lifting hole.
Handle hole
Wood base
This product maximum tilt
angle 20 degrees.
Focus Handle
hole
3
Français
Summary of Contents for 38VS125C7SHQEE
Page 35: ...The manufacturer reserves the right to change any product specifications without notice ...
Page 66: ...Il produttore si riserva il diritto di modificare le specifiche del prodotto senza preavviso ...
Page 97: ...Le fabricant se réserve le droit de modifier les spécifications du produit sans préavis ...
Page 128: ...Der Hersteller behält sich das Recht vor Produktspezifikationen ohne Vorankündigung zu ändern ...