Trasporto e sollevamento
3
Sollevamento
Metodo di sollevamento
Durante il sollevamento dell'unità, verificare che essa resti sempre
in orizzontale
1. La rimozione dell'imballaggio esterno è assolutamente proibita
2. Come mostrato, sollevare la macchina per esterni utilizzando
due funi.
fune
Oltre i 60 gradi
0,7~ 1,0 metri
Non rimuovere il
nastro di imballaggio
e la scatola di
imballaggio
Come mostrato,
far passare la fune
attraverso la base in
legno intorno al foro di
sollevamento.
Foro di presa
manuale
Base in legno
Centro
Foro di presa
manuale
Inclinare il
prodotto massimo
a 20 gradi.
• Non posizionare nulla sul dispositivo.
• Per il sollevamento dell'unità esterna utilizzare due funi.
CAUTELA
CAUTELA
CAUTELA
Manipolazione manuale
• Allo scopo di garantire la sicurezza, sollevare
lentamente e con cautela.
• Durante il sollevamento deve essere utilizzata
una protezione esterna, come un panno o artone.
• Durante l'inallazione e la messa in funzione, non posizionare nessun materiale non pertinente sulla macchina
esterna allo scopo di garantire che non siano presenti detriti all'interno della macchina, il che può causare
incidenti o incendi.
Preare attenzione ai punti seguenti nella manipolazione manuale dell'apparecchiatura:
1. La base in legno non deve essere demolita.
2. Allo scopo di evitare che la macchina esterna possa rovesciarsi, il relativo baricentro deve essere indicato
come mostrato nella figura.
3. La macchina esterna deve essere trasportata da due o più persone.
3
English
Transportation and Lifting
Lifting
In front of the unit shipped from unpacking location as
close as possible.
CAUTION
Do not place anything on the device.
Two ropes shall be used for lifting the outdoor unit.
Hoisting method
Hoisting to ensure that the level of outdoor machine, slowly
lifting.
1. Removal of outer packing is strictly prohibited
2. As shown by two ropes hoist with outdoor machine
packaging.
CAUTION
In order to ensure safety, maintain the level of lifting,
slowly lifting.
Do not lift the elevator to the packing and outer packing
of the equipment.
External protection should be used when lifting, such
as cloth or cardboard.
Manual handling
CAUTION
In the installation and commissioning, the outdoor machine do not put any irrelevant material, to ensure that there is
no debris inside the machine, or there may be a fi re or accident.
Pay attention to the following points when handling the equipment manually:
1. No demolition wood base.
2. In order to prevent the dumping of the outdoor machine, the center of gravity of the unit should be noted as shown in
the fi gure.
3. Two or more people to carry out the outdoor machine.
rope
Over 60 degrees
0.7~1.0 meters
Do not remove
packing tape and
packing box.
As shown in the
rope through the
wood base around
the lifting hole.
Handle hole
Wood base
This product maximum tilt
angle 20 degrees.
Focus Handle
hole
3
English
Transportation and Lifting
Lifting
In front of the unit shipped from unpacking location as
close as possible.
CAUTION
Do not place anything on the device.
Two ropes shall be used for lifting the outdoor unit.
Hoisting method
Hoisting to ensure that the level of outdoor machine, slowly
lifting.
1. Removal of outer packing is strictly prohibited
2. As shown by two ropes hoist with outdoor machine
packaging.
CAUTION
In order to ensure safety, maintain the level of lifting,
slowly lifting.
Do not lift the elevator to the packing and outer packing
of the equipment.
External protection should be used when lifting, such
as cloth or cardboard.
Manual handling
CAUTION
In the installation and commissioning, the outdoor machine do not put any irrelevant material, to ensure that there is
no debris inside the machine, or there may be a fi re or accident.
Pay attention to the following points when handling the equipment manually:
1. No demolition wood base.
2. In order to prevent the dumping of the outdoor machine, the center of gravity of the unit should be noted as shown in
the fi gure.
3. Two or more people to carry out the outdoor machine.
rope
Over 60 degrees
0.7~1.0 meters
Do not remove
packing tape and
packing box.
As shown in the
rope through the
wood base around
the lifting hole.
Handle hole
Wood base
This product maximum tilt
angle 20 degrees.
Focus Handle
hole
3
Summary of Contents for 38VS125C7SHQEE
Page 35: ...The manufacturer reserves the right to change any product specifications without notice ...
Page 66: ...Il produttore si riserva il diritto di modificare le specifiche del prodotto senza preavviso ...
Page 97: ...Le fabricant se réserve le droit de modifier les spécifications du produit sans préavis ...
Page 128: ...Der Hersteller behält sich das Recht vor Produktspezifikationen ohne Vorankündigung zu ändern ...