Carrier 17EX Series, Start-Up, Operation And Maintenance Instructions Manual

Page: 101 / 120

Table 17 — Additional Condenser Weights*
COMPONENT
HEAT EXCHANGER
SIZE
WATERBOX TYPE
NUMBER OF
PASSES
DESIGN MAXIMUM
WATER PRESSURE
ADDITIONAL
DRY WEIGHT
ADDITIONAL
WATER WEIGHT
psig kPa lb kg lb kg
CONDENSER
45 - 47
NIH 1, 3 150 1034 344 156 — —
NIH 1, 3 300 2068 1652 749 — —
NIH 2 300 2068 1132 513 — —
Marine 1, 3 150 1034 1692 767 3 400 1 542
Marine 2 150 1034 674 306 1 700 771
Marine 1, 3 300 2068 2651 1 202 3 400 1 542
Marine 2 300 2068 1630 739 1 700 771
55 - 57
NIH 1 150 1034 † † — —
NIH 1 300 2068 1588 720 — —
NIH 2 300 2068 1591 721 — —
Marine 2 150 1034 25 11 1 734 787
Marine 2 300 2068 1225 555 1 734 787
NIH — Nozzle-In-Head
*When using a chiller configuration other than 2-pass, NIH waterboxes with
150 psig (1034 kPa) covers, add the weights listed in this table to the appro-
priate weights in Table 15 to obtain the correct condenser weight.
†Subtract 228 lb (103 kg) from the weight shown in Table 15.
Table 18 — Compressor Weight and Elbow Weight
COMPONENT
WEIGHT*
English (lb) SI (kg)
COMPRESSOR 5000 2270
SUCTION ELBOW 500 225
*Approximate.
Table 19 — Drive Component Weights*
BASE GEAR
COUPLING
GUARD
High Low
lb kg lb kg lb kg lb kg lb kg
2200 998 1500 680 32 15 75 34 50 23
*See Table 20A or 20B for motor weights.
101