Carrier Access Broadmore 1750, User Manual

Page: 356 / 420

12-38 Broadmore 1750 - Release 4.6
SNMP Configuration
Notifications
NOTE:
Entries in this table cannot be added or deleted, only edited. The
storage type for these entries is automatically configured to “permanent”.
The screen below shows the Edit Notifications Entry.
The following table describes the selections
Item Options Comments
Notify Name This parameter cannot be changed.
Trap Tag string The default name is “Trap”. If remote managers
are to receive all traps, there is no need to modify
the Trap Tag. Different tag names would be useful
if responsibility for trap management was
subdivided by trap types such that a specific
destination was only responsible for a partial set of
traps.
Enabled Enabled
Disabled Enables/disables this notification.