Carpet Pro CPBU-1 Owner'S Manual Download Page 25

Page: 25 / 28

Warranty

What Is Covered:

This warranty covers any defects in material and workmanship in your new Carpet Pro vacuum.

How Long Coverage Lasts:

Warranty coverage for the Carpet Pro vacuum lasts one year. Household models used commercially

are only warranted for 90 days.

What Is Not Covered:

• Damage to the vacuum that occurs from neglect, abuse, alterations, accident, misuse or improper

maintenance.

• Normal replacement items: belts and disposable filters.

What Carpet Pro Will Do:

This warranty provides, at no cost to you, all labor and parts to keep this vacuum in proper

operating condition during the warranted period.

How to Get Service:

Warranty service can only be obtained by presenting the vacuum to the Carpet Pro Service Center.

A proof-of-purchase and product serial number will be required before service is rendered.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER WARRANTIES WHETHER

WRITTEN, ORAL, EXPRESSED OR IMPLIED, (INCLUDING ANY WARRANTY OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE). THIS WARRANTY DISCLAIMS LIABILITY FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES.

How State Law Applies:

This warranty gives you specific legal rights, and you may also have other rights that vary from state

to state.

Summary of Contents for CPBU-1





























Search results

Summary of Contents for CPBU-1

Reviews:

Related manuals for CPBU-1

Brands by name

Popular brands

Carpet Pro CPBU-1, Owner'S Manual

Search results

Summary of Contents for CPBU-1

Reviews:

Related manuals for CPBU-1

Brands by name

Popular brands