15
-19-
PRIMARY FILTER CLEANING
Dustbin
Upper
Release
Button
Botón de
liberación
del contenedor
de polvo
Frame
Secondary
Filter
Dustbin
Lid Latch
How to Replace the Vacuum Filters
1. Turn off and unplug the vacuum cleaner.
3. Pull up on the
dustbin lid latch
to open the
dustbin (Fig. 2).
2. Remove the
dustbin from the
vacuum cleaner
(Fig. 1).
4. Remove the filter
frame and filter
(Fig. 3).
How to Clean/Replace the Secondary Filter
Fig. 1
Fig. 2
Fig. 3
Fig. 3
It is recommended to wash the filter with cold water at least every three (3) months.
-19-
PRIMARY FILTER CLEANING
Dustbin
Upper
Release
Button
Botón de
liberación
del contenedor
de polvo
Frame
Secondary
Filter
Dustbin
Lid Latch
5. Remove the filter from the frame (Fig. 3).
6. Wash the filter with cold water only, DO NOT use
detergent or soap. Repeat 10 times or until water
runs clear.
7. Once the filter is washed clean, squeeze by hand
and allow to air dry until completely dry before
putting back into the vacuum cleaner.
8. Reinstall the filter into the frame and then into the
dustbin lid.
9. Close the lid. A noticeable click should be heard.
10. Reinstall the dustbin into the vacuum cleaner.
Note
: When cleaning the filter no longer restores the
vacuum cleaner suction to full power, replace the filter.
DO NOT operate without filter installed.
DO NOT wash filter in the dishwasher.
DO NOT install damp filter into vacuum cleaner.
